Polyester Films

Polymex® PSG GROUP Ltd strives to provide customers with products that meet or exceed their critical process requirements. Polymex® film is used in an endless variety of applications including Electrical, Imaging, Packaging, Window & Safety, Release Liner, Label Facestock, and Thermal Lamination.

(PSG GROUP Ltd)

Melinex® Melinex® polyester films are known around the world and used in hundreds of industrial, packaging, imaging, printing, technical and consumer products.

With more than 930 basic grade types covering 90+ market segments and 140+ specific end uses, we produce the world’s broadest range of high-quality polyester film.

Melinex® is a biaxially oriented polyester film from the DuPont Teijin Films family of films. This family includes Melinex® polyester film, Mylar® polyester film and Cronar® polyester photographic film base.

(DuPont Teijin Films)

Mylar® Since Mylar® polyester film was invented in the early 1950s, it has been used in a variety of applications that add value to products in virtually all segments of the world. After nearly 50 years, the future still holds great promise for Mylar®. Its excellent balance of properties and extraordinary range of performance capabilities make Mylar® ideal for a broad array of applications in the electrical, electronics, magnetic media, industrial specialty, imaging and graphics, and packaging markets.

Mylar® polyester film, only by DuPont Teijin Films, is available uncoated or coated in a broad variety of thickness and width.

(DuPont Teijin Films)

Hostaphan® Mitsubishi Polyester Film strives to provide customers with products that meet or exceed their critical process requirements. Hostaphan® film is used in an endless variety of applications including Electrical, Imaging, Packaging, Window & Safety, Release Liner, Label Facestock, and Thermal Lamination.

(Mitsubishi Polyester Film)

Lumirror® Lumirror® is a biaxially oriented polyester film, produced on an industrial scale for the first time in Japan by Toray. It is being used worldwide in a variety of applications ranging from electronics to packaging, magnetic and industrial specialties.

Lumirror® is a chlorine-free, environmentally-friendly material. It is attracting international attention anew under the growing concerns about environmental problems.

Lumirror® has an excellent balance of properties which cannot be found in other films, such as mechanical strength, electrical properties, high & low temperature resistance and chemical resistance.

(TORAY)

Claryl® We are proud of our constant contribution to the evolution of Flexible Packaging in Europe for the last twenty years. Whatever the laminate you produce, especially those requiring barrier properties, Lumirror and Claryl films fulfil the most severe requirements in packaging, today and tomorrow. Toray Plastics Europe’s dedication and expertise in Packaging make us as the right partner.

(TORAY)

Excell® Since the introduction of the polyester base film “Excell” in 1985, Toray Saehan has manufactured a wide range of films including magnetic recording, industrial, electro-magnetic, packaging, graphic, and others. Our product line – from ultra-thin 3.5µm up to 180µm – have superior physical and thermal properties appropriate for our customers’ processing conditions in a variety of applications.

The worldwide export market for polyester film attests to its outstanding quality. The Toray Saehan production site has an annual capacity of 94,000 tons per year. Our technical alliance with the world’s top film maker, Toray of Japan, we are able to constantly develop new products.
(TORAY SAEHAN)

Nu Roll®

Shinpex® SHINPEX polyester film from Shinkong has the following properties:
Mechanicall tensile strength of between 17,000 to 32,000 psi (roughly ten times stronger than polyethylene wrap), excellent stretching and strength.
Good measurement stability, low shrikage due to heating
Outstanding resistance to heat anf cold: melting point 260ºC, and broader operating range (-70ºC~150ºC)
Optical: high degree of transparency, lustrous, smooth surface, good external appearance, high value-added product
Electrical: good dielectric properties, used as insulation materials
Chemical: no dissolution in organic solvents, especially to acids and oil
Gas permeability: outstanding screenting for gas, odor and stream
Hygiene safety: no plasticity or toxic materials, safe in hygiene, received U.S. FDA approval, for use in packing
Easy to manufacture, excellent service
(SHINKONG)

Jindal

Garfilm

FLEXPET™ We manufacture in-house Polyester chips, BOPET / BOPP / COATED / METALLISED / CPP Films, Packaging machines, converting equipment, inks, adhesives, Flexible Laminates and Pouches and have emerged as a “one stop shop” committed to providing customers with competitive advantage, placing top priority to “customer success”.
(Flex Industries Limited)

Mapet® MAPET films have high tensile and dielectric strength, good chemical & thermal stability & excellent optical and electrical properties as well as processability at the users’ end.

The entire process of film production, including slitting & packing is performed in a dust free & clean environment. MAPET is available in a wide variety suitable for a number of applications.